原帖由 Enlighten 于 2012-2-15 20:17 发表 
不同版本有啥区别？
具我了解, 关键的efs 电子频率扫描和机内组件的冷冻处理是一样的,
区别主要是一个bridging switch circuit ,和高级的cardas接插件, 前面这个电路决定了你同时褒3种线(含电源线) 还是2种线(不含电源线) 的能力.
官网解释如下:
What is the difference between the Standard Plus version, and Anniversary Edition? Firstly, the circuitry for the Standard Plus Cooker is identical with that of the Anniversary Edition, as is the chassis. Both versions offer full cryogenic treatment of all connectors, switches, internal wiring, and circuit board. The primary difference between the models is the binding post hardware. The Standard Plus Cooker features gold-plated, color-coded, hex-shaped plastic binding posts, and is perfect for use with banana terminations and lightweight speaker cables terminated with lighter-weight spades. Solid-core, bare wire can also be conditioned (up to 10-gauge) via a conveniently-placed hole in the post itself. The Anniversary Edition improves on the former Pro version with the installation of two models of Cardas binding posts (a choice of either the
brass ACBP's or premium all-copper billet CCGR's). These posts have a larger surface contact area than the Standard Plus posts, providing improved connectivity and conductivity, better serving those customers with heavier/stiffer/thicker speaker leads and spades. The CCGR's, in particular, are featured on many fine amplifiers and loudspeakers, and can accommodate the largest and thickest spade terminations available. The Anniversary Edition also features the bridging switch circuit that allows simultaneous break-in of interconnects, speaker cabling, AND power cabling (see below). Please explain what the bridging switch does. With the original version 2.0, interconnects and speaker cable, OR interconnects and power cabling could be broken-in together....just not all three. This is due to the nature and necessity of wiring the connectors in series for the best possible signal integrity (from the Cooker). The optional installation of this bridging switch and circuit (along with the requisite wiring) on the Standard and Standard Plus Cooker allows simultaneous break-in of all three types of cables without any signal degradation. It is especially useful and time-saving for those who have quite a bit of cabling to condition, and for those who are performing a periodic "recharge" of their cabling on a regular basis.
The bridging switch is a $40 upgrade option on the Standard Plus Cooker. (Please note that version 2.0 is no longer in production) | 
发表于 2012-2-15 19:41:50
发表于 2012-2-15 19:44:10
楼主
老外花头也蛮多的嘛
