|
楼主 |
发表于 2012-12-23 21:58:54
|
显示全部楼层
SILVER LINE Serie – the next generation
The remake of our SILVER LINE is based on proven technical specifications. Conductor material is oxygen-free high conductivity (OFHC) copper with a degree of purity of 99,9%. It still uses solid core technique for each single conductor over the cable length, they join again only in the plug. The actual SILVER LINE has an black textile filament mesh with a silver thread.
The construction is still the same, conductors are braided in a proprietary counter array geometry (WSS anti-string technology) with different layers and strands around a core. This and the primary insulation (Polyethylene [HDPE-2Y]) guaranties very low capacity- and impedance-values. In the small signal cable ETFE (7Y), loudspeakers and power cables is Polyethylene (HDPE-2Y) used as a primary isolation.
The shielding of the NF- and power cables is done by one layer of ALU-Mylar foil in combination with a tinned copper mesh. It makes the cable 100% Hf-secured and delivers also high attenuation of shielding. The secondary isolation is a special thermoplastic all elastomer which makes the cable very flexible.
[ 本帖最后由 bernie 于 2012-12-23 22:00 编辑 ] |
|