|
感谢关注耳机俱乐部网站,注册后有更多权限。
您需要 登录 才可以下载或查看,没有账号?注册
x
本帖最后由 evan 于 2013-8-22 19:20 编辑
最近刚刚整了一个二手唱机,唱机出来的是BNC接头的连线,原配的唱头是 Audio Technica AT-OC5(Moving coil cartridge),不知道如何配唱放?请多指教,感谢哈。
我从网上找了这个唱头的相关数据:
Type
moving coil | Output Voltage
mV | Frequency Response
15Hz - 50kHz | Tracking Force
1.25 - 1.75g | Mass
8g | Channel Separation
27dB | Channel Balance
1.5dB | Load Impedance
> 20 ohms | Output Impedance
12 ohms |
| Stylus | Stylus Tip
nude biradial 0.2 x 0.7mil | Cantilever | Dynamic Compliance
x 10-6cm/Dyne | Static Compliance | Notes
*AT publishes their dynamic compliance specifications relative to 100Hz . The actual compliance at 10Hz will be higher. |
Technische Daten / Cartridge Specifications | Nadelschliff |
| biradial nude (0.2x0.7 mil) | Stylus Type |
|
| |
|
| |
|
| Frequenzgang |
| 15Hz - 50.000Hz | Frequency Range |
|
| Nadelnachgiebigkeit | | | Compliance | |
| Ausgangsspannung |
| 0,4mV | Output Voltage |
|
| Empf. Auflagekraft |
| 1,25g-1,75g (12,5mN-17,5mN) | Tracking Force recommended |
|
| Funktionsprinzip |
| MC / Moving Coil | Type |
|
| Befestigung |
| 1/2" (12,7mm) / Half-inch mount | Fixing |
|
| Gewicht |
| 8g | Weight |
| |
|
|