原帖由 小白 于 2012-2-15 19:10 发表 http://bbs.headphoneclub.com/images/common/back.gif
但是熟女总有头一次的吧。煲线器就是弄头一次的。弄弄彻底罢了。
小白这话忒隐晦了~~~
:lol
更喜欢调教的路过:lol :lol
原帖由 Enlighten 于 2012-2-15 19:40 发表 http://bbs.headphoneclub.com/images/common/back.gif
建议小白先把两个褒线器对干一下
然后安润店里专门买一台24小时提供服务
对了，煲线器自己需要煲吗？哈哈 。。。
原帖由 springson 于 2012-2-15 18:29 发表 http://bbs.headphoneclub.com/images/common/back.gif
多少钱?
厂家直供, 基础3.0 plus版本 799美刀 , 加上邮费啥的6000人刀还不到.
最高级版本的就贵点, 差不多1099美刀.
这家还买转接头, 电源线可以同时褒.
原帖由 bruceshen 于 2012-2-15 20:16 发表 http://bbs.headphoneclub.com/images/common/back.gif
厂家直供, 基础3.0 plus版本 799美刀 , 加上邮费啥的6000人刀还不到.
最高级版本的就贵点, 差不多1099美刀.
这家还买转接头, 电源线可以同时褒.
不同版本有啥区别？
原帖由 Enlighten 于 2012-2-15 20:17 发表 http://bbs.headphoneclub.com/images/common/back.gif
不同版本有啥区别？
具我了解, 关键的efs 电子频率扫描和机内组件的冷冻处理是一样的,
区别主要是一个bridging switch circuit ,和高级的cardas接插件, 前面这个电路决定了你同时褒3种线(含电源线) 还是2种线(不含电源线) 的能力.
官网解释如下:
What is the difference between the Standard Plus version, and Anniversary Edition? Firstly, the circuitry for the Standard Plus Cooker is identical with that of the Anniversary Edition, as is the chassis.Both versions offer full cryogenic treatment of all connectors, switches, internal wiring, and circuit board.The primary difference between the models is the binding post hardware.The Standard Plus Cooker features gold-plated, color-coded, hex-shaped plastic binding posts, and is perfect for use with banana terminations and lightweight speaker cables terminated with lighter-weight spades.Solid-core, bare wire can also be conditioned (up to 10-gauge) via a conveniently-placed hole in the post itself. The Anniversary Edition improves on the former Pro version with the installation of two models of Cardas binding posts (a choice of either the
brass ACBP's or premium all-copper billet CCGR's). These posts have a larger surface contact area than the Standard Plus posts, providing improved connectivity and conductivity, better serving those customers with heavier/stiffer/thicker speaker leads and spades. The CCGR's, in particular, are featured on many fine amplifiers and loudspeakers, and can accommodate the largest and thickest spade terminations available.The Anniversary Edition also features the bridging switch circuit that allows simultaneous break-in of interconnects, speaker cabling, AND power cabling (see below).Please explain what the bridging switch does.With the original version 2.0, interconnects and speaker cable, OR interconnects and power cabling could be broken-in together....just not all three. This is due to the nature and necessity of wiring the connectors in series for the best possible signal integrity (from the Cooker). The optional installation of this bridging switch and circuit (along with the requisite wiring) on the Standard and Standard Plus Cooker allows simultaneous break-in of all three types of cables without any signal degradation. It is especially useful and time-saving for those who have quite a bit of cabling to condition, and for those who are performing a periodic "recharge" of their cabling on a regular basis.
The bridging switch is a $40 upgrade option on the Standard Plus Cooker.(Please note that version 2.0 is no longer in production)
http://audioexcellenceaz.com/cablecooker3.htm
基础版性价比超高, 还能返原厂升级成白金版本:lol
这个机器据说从prototype, 2.0, 2.5, 2.5 plus, 一直到现在的3.0 plus和anniversary edition好评不断...
[ 本帖最后由 bruceshen 于 2012-2-15 20:30 编辑 ]
有个问题想请交一下，自然煲是不是煲不好呀
原帖由 阿尔托莉雅 于 2012-2-15 21:22 发表 http://bbs.headphoneclub.com/images/common/back.gif
有个问题想请交一下，自然煲是不是煲不好呀
也褒得好, 但时间相当长, 比如数字线要1-2年.
我的yter rca褒了2年多才出状态, 有比较的.
白金版:funk: 老外花头也蛮多的嘛
全套刚处理完正在吸毒:victory:
据我所知，这煲线器好像不是褒一次就一劳永逸的。
为了维持线的状态，每年都要至少“搞”一次
是不是这样？;P
原帖由 当年情 于 2012-2-16 00:00 发表 http://bbs.headphoneclub.com/images/common/back.gif
据我所知，这煲线器好像不是褒一次就一劳永逸的。
为了维持线的状态，每年都要至少“搞”一次
是不是这样？;P
不知道， 自己试了才知道。
脱掉
diy
大家有福了:lol
原帖由 Enlighten 于 2012-2-15 19:40 发表 http://bbs.headphoneclub.com/images/common/back.gif
建议小白先把两个褒线器对干一下
然后安润店里专门买一台24小时提供服务
这个提议很好。
